User Posts: MOZ Official Authors

RJ11, RJ12, and RJ45 are three modular connector names that are often confused because they look similar at first glance. They all use a compact plastic plug ...

Engineering Focus This article provides a deep technical comparison of ETF0102, TXS0102, and PCA9306, focusing on real-world signal integrity, ...

LoRa, XBee and RFM69 modules all support wireless sensor or telemetry projects, but they serve different engineering priorities. LoRa is usually the best ...

SX1262 and SX1276 are both widely used LoRa radio platforms for long-range, low-power wireless communication, but they are not identical choices. SX1276 is ...

The best RF module for long-distance wireless communication is usually not the module with the biggest range number on a product page. It is the module that ...

An autopilot control system, also known as part of an Automatic Flight Control System (AFCS), is an aircraft automation system that helps stabilize the ...

The Core ESP32-C3 Board for Arduino is one of the most practical entry points for building compact Wi-Fi and Bluetooth Low Energy projects. It gives Arduino ...

SR626SW is a small silver-oxide button cell used in compact, low-drain electronics. It is commonly associated with 377-style replacement charts and the IEC ...

CR2016 and CR2032 are both 3 V lithium manganese dioxide coin cells with a 20 mm diameter. The main difference is thickness: CR2016 is about 1.6 mm ...

CR1616, CR1620, and CR1632 are 3 V lithium manganese dioxide coin cells with the same 16 mm diameter but different thicknesses. That makes them easy to ...

User Deals: MOZ Official Authors
Eaton FH18 A200/B100 Thermal Overload Heater
Deal
The Eaton FH18 is a calibrated thermal overload heater element for A200 contactor starters and B100 manual motor starters. Designed for compatible Type A and Type B overload relays, it supports accurate motor-overload response when selected according to motor nameplate current, phase configuration, enclosure and ambient conditions.
Panduit Corp CMSBUSCZBU SC SIMPL (BU) ADAPTER (BU) MODUL
Deal
The CMSBUSCZBU cable management system component provides a structured, scalable, and professional solution for organizing high-density cabling environments. Backed by the engineering standards of Panduit Corp, it is optimized for reliability, installation efficiency, and long-term infrastructure performance.
ETEK MICROELECTRONICS ETF0102M Logic Translators, Level Shifters
Deal
ETF0102M is preferred for general-purpose designs with easier assembly, while ETF0102Y is optimized for high-density PCB layouts.
W4P TE Connectivity Deutsch Connector – Reliable Sealed 4-Pin Automotive & Industrial Plug
Deal
The W4P TE Connectivity Deutsch Connector delivers a compact, rugged, and environmentally sealed 4-pin interconnect solution designed for demanding automotive and industrial systems. It ensures long-term durability, secure mating, and stable electrical performance in harsh operating conditions.
HFJT1-10GHPE-L12RL HALO 10G PoE RJ45 FastJack Connector
Deal
HALO HFJT1-10GHPE-L12RL FastJack™ 1-port shielded RJ45 connector with integrated magnetics, Green/Yellow LEDs, through-hole mounting, 10G Base-T support, and PoE/PoE+/4PPoE compatibility.
Microchip LAN8720AI-CP-TR, Ethernet Transceiver, 1.6 V 100 Mbps RMII, 24-Pin 3.3V QFN
Deal
LAN8720AI-CP-TR is a Microchip low-power 10/100 Mbps Ethernet PHY transceiver with RMII interface, HP Auto-MDIX support, and a compact 24-QFN package for embedded Ethernet applications.
Baumer IFRM 08P3707 Inductive Proximity Sensor, Ø8x30mm, Flush, 12-30VDC, 2mm Range, PNP NC, 1m FEP Cable, IP67
Deal
IFRM 08P3707 is a Baumer high-temperature inductive proximity sensor with 2 mm sensing distance, PNP break function output, 1 m FEP cable, stainless steel housing, and IP67 protection.
ICM-42688-P TDK InvenSense 6-Axis MEMS IMU | High-Precision Motion Sensor
Deal
ICM-42688-P is a high-performance 6-axis MEMS IMU from TDK InvenSense, integrating a 3-axis gyroscope and 3-axis accelerometer with low-noise sensing, external clock input, APEX motion functions, and I3C/I²C/SPI interfaces.
MPU-9250 9-Axis MotionTracking Sensor | InvenSense IMU
Deal
MPU-9250 9-axis MEMS MotionTracking sensor with integrated gyroscope, accelerometer, magnetometer, DMP, I²C/SPI interface, and 3 × 3 × 1 mm QFN package.
ICM-45686 TDK InvenSense 6-Axis MEMS Motion Sensor
Deal
ICM-45686 is a compact TDK InvenSense 6-axis MEMS MotionTracking sensor with BalancedGyro™ technology, low-power 6-axis operation, ±4000 dps gyro range, ±32 g accelerometer range, and embedded APEX motion functions.
ICM-20948 TDK InvenSense 9-Axis MEMS MotionTracking IMU Sensor
Deal
The TDK InvenSense ICM-20948 is a compact, low-power 9-axis MEMS MotionTracking™ IMU designed for applications that require integrated acceleration, angular rate, magnetic field, and motion-fusion data. With its embedded DMP™, I²C/SPI digital interfaces, and small 24-QFN package, it is a strong choice for wearable devices, IoT products, drones, and portable motion-sensing systems where space, power, and sensor integration are key design considerations.
MPU-6050 TDK InvenSense 6-Axis IMU Sensor | Gyroscope & Accelerometer
Deal

TDK InvenSense MPU-6050 is a 6-axis MEMS MotionTracking IMU with a 3-axis gyroscope, 3-axis accelerometer, I²C interface, 16-bit ADCs, DMP, FIFO buffer, and 24-QFN 4 mm × 4 mm package.

Show next
Browsing All Comments By: MOZ Official Authors
MOZ Electronics
Logo
Shopping cart