Infineon
Filter
Showing all 7 results
- Automotive-grade protection: Survives ±30 kV IEC 61000-4-2 ESD and 5 A (8/20 µs) surge for CAN/LIN and 12/24 V rails.
- Signal-friendly capacitance: ~24 pF typ. line-to-line to preserve bus edges and bandwidth.
- Flexible SOT-23 pinout: Two-line unidirectional or single-line bidirectional (pins 1–2) by leaving pin 3 floating.
The ETD580N16P60 is a 1600V, 580A press-pack thyristor module from Infineon’s Eco Block series. It is designed for demanding industrial power systems that require high current capability, strong overload performance, and reliable operation under repeated power cycling conditions. Its pressure-contact construction and short-on-failure behavior make it suitable for rectifiers, inverters, motor drives, UPS equipment, and other high-power conversion systems.
- Ultra-low conduction loss: RDS(on) 5.9 mΩ typ., 7 mΩ max @ VGS = 10 V, ID = 82 A.
- High current & ruggedness: ID = 140 A (Tc = 25 °C), IDM = 550 A, repetitive avalanche allowed up to Tj(max).
- High-temperature operation: qualified for 175 °C junction temperature with low RθJC = 0.45 °C/W for efficient heat flow.
Infineon SAL-XC866L-4FRA 5V BE XC8 series Microcontroller IC 8-Bit 81MHz 16KB (16K x 8) FLASH PG-TSSOP-38-4
TDB6HK180N16RR_B11 is an Infineon EconoBRIDGE power module featuring a 1600 V half-controlled bridge rectifier and an integrated brake chopper IGBT for industrial drives, converters, active rectifiers and power supply systems.
TD120N16SOF is an Infineon 1600V, 120A thyristor / diode power module in a BG-SB20-1 package. It is designed for phase control, controlled rectifier, soft starter, UPS, drive, and battery charger applications where high current capability, electrical isolation, and reliable thermal performance are required.
The TT60N16SOF from Infineon provides high-efficiency switching in a compact module. Its integrated diode, high current capacity, and robust thermal performance make it ideal for demanding industrial and power electronics applications.