Filter
Showing 2461–2490 of 2509 results
- Ultra-Low Distortion (<0.00003% THD+N)
- Blazing-Fast 1900V/µs Slew Rate
- Low Noise (2.7nV/√Hz) & Wide Bandwidth (132MHz)
- All-in-one USB — single cable for power, flashing, debug, and backchannel UART.
- Instant I/O — built-in red LED and user button for immediate bring-up and demos.
- BoosterPack-ready — standard 20-pin headers to snap in sensors, radios, and displays fast.
- FRAM Memory: 32KB nonvolatile storage with 10^15 write cycles and 100ns write speed.
- Ultra-Low-Power Modes: Measure down to µA with 32.768kHz crystal for LPM sleep states.
- BoosterPack™ Ready: 40-pin headers support 100+ plug-in modules (wireless, displays, etc.).
- Integrated Debugging: eZ-FET probe enables programming + EnergyTrace power profiling.
- Sensor Hub: Includes ambient light sensor + Grove connector (P1.1/P1.4) for Seeed Studio modules.
- Industrial Temperature Range (-40°C to +85°C) for harsh environment operation
- Higher Output Drive Capacity (±6mA at 5V) vs basic 74HC logic family
- Robust ESD Protection (2000V HBM) for improved field reliability
- Through-hole DIP package - Ideal for prototyping and repairs
- 15 LSTTL load drive capability - Strong output for direct loads
- Cascadable serial output - Expand to unlimited bits
- 60ns Access Time – Faster performance than 70ns variants for demanding applications.
- 256K x 16-Bit Architecture – Efficient 16-bit memory handling for older systems.
- Wider Temperature Range: Operates reliably from 0°C to 70°C.
- 70ns Access Time – Optimized for fast read/write operations in high-performance systems.
- 256K x 16-Bit Organization – Balances memory density with efficient data handling.
- 5V Single Supply Voltage – Compatible with legacy industrial and embedded devices.
- Fully Integrated 1A Linear Charger: The TP4056 eliminates external MOSFETs, diodes, and sense resistors, reducing design complexity and PCB space while maintaining efficient lithium-ion charge management.
- Intelligent Charging with Safety Protections: Its CC/CV algorithm, thermal regulation, trickle charge, and automatic recharge ensure long battery life, safety, and reliable performance across various portable devices.
- USB-Friendly Design: With its input voltage range and low component count, the TP4056 is ideal for USB-powered products, supporting global consumer electronics and IoT markets.
Vishay MAL218497557E3 aluminum polymer capacitor offers 100μF/20V in compact 8×8×11.7mm SMD package with ultra-low 35mΩ ESR and 4.21A ripple current.
- Ultra-low ESR (35mΩ) for high efficiency
- High ripple current (4.21A) handles power demands
- Extended 2000-hour lifespan at 105°C
- Ultra-Efficient: Just 720mV Vf @ 2A reduces thermal stress
- Automotive Tough: AEC-Q101 certified (-55°C to +175°C operation)
- Space-Smart: DO-219AB (2.9×1.9mm) fits high-density PCBs
- Balanced CTR (63–125 %) with Safety Compliance: Offers moderate drive while assuring safe-isolation certification.
- High Isolation Performance: Ensures electrical separation in demanding systems at 3750 VRMS rating.
- Compact Tape-and-Reel Format: "T" suffix allows efficient SMT integration; “X001” ensures agency approved variant.
- High CTR at Low Input Current: The -3 bin (100 %–200 %) enables efficient signal coupling even with minimal LED drive, beneficial for low-power designs.
- High Isolation Voltage: With a 3750 VRMS isolation test rating and repetitive peak isolation well over 500 V, it safeguards high-voltage to low-voltage interfaces.
- Compact Low-Profile Package: SSOP-4 half-pitch package allows slim board real estate usage, making this optocoupler suitable for space-constrained applications.
- Safety-Certified Isolation (Option 1): This variant includes the “X001” safety option making it compliant for applications requiring guaranteed insulation separation (e.g., per IEC standards).
- 100-200 % CTR Bin: High transfer ratio helps reduce LED drive current, improving efficiency and reducing system power consumption.
- Compact Tape-and-Reel Packaging: “T” suffix indicates reel packaging, facilitating automated surface-mount assembly flows.
- Compact High-Performance Isolation Device: Delivers full isolation performance in a minimal footprint.
- Low Input Drive Requirement: Compatible with designs where LED drive current is constrained.
- Robust Voltage Ratings: With 80 V VCEO and 3750 VRMS isolation, it withstands demanding electrical environments.
- Mid-Range CTR (80–160 %): Well matched for designs with moderate LED drive and cost-sensitive requirements.
- High Isolation Assurance: 3750 VRMS isolation ensures safe separation between input/output circuits in noisy or high-voltage environments.
- Space-Efficient Packaging: The SSOP-4 format allows minimal board real estate while delivering full isolation performance.
- Very High CTR (130–260 %): Enables ultra-low drive currents from the LED side, reducing power consumption.
- Strong Isolation Capability: 3750 VRMS isolation ensures robust separation of circuits in harsh electrical environments.
- Compact SSOP-4 Mini-Flat Package: Designed for PCB area savings and surface-mount reliability.
- Extremely Flexible CTR Range (50–600 %): Allows designers to optimize LED drive and circuit coupling across a wide range of applications.
- Certified Option 1 Insulation: The “X001” version ensures compliance with safety insulation standards, making the part suited for critical medical/industrial isolation.
- Compact and SMT-ready Form Factor: The SSOP-4 package and tape-and-reel (T suffix) format streamline automated assembly in compact systems.
- Wide CTR Range (50–600 %): Provides selection flexibility for designers to match input current and drive conditions.
- High Isolation Performance: With 3750 VRMS test rating and robust insulation distances, it delivers reliable electrical separation.
- Compact Packaging, Robust Design: The SSOP-4 package allows integration into dense PCBs while delivering high performance.
