JANTXV1N4567AUR-1 Microchip JANTXV1N4567AUR-1 Zener Diodes

Microchip JANTXV1N4567AUR-1 Zener Diodes Overview

The Microchip Metallurgically Bonded Glass Zener Diode is a reliable and efficient component designed for voltage regulation and protection in electronic circuits. Operating at a nominal voltage of 6.4V, this Zener diode features a low dynamic resistance of 200 Ohms and a minimal reverse current of 2µA, making it an ideal choice for applications requiring precise voltage clamping. Housed in a compact 2-Pin DO-213AA surface mount package, this diode is suitable for high-density circuit designs and ensures robust performance in various electronic applications.

Key Features of Microchip JANTXV1N4567AUR-1 Zener Diodes

• Engineered to low Reverse Current: 2µA, supporting dependable performance in real-world designs.
• Engineered to lifecycle Status: Production, supporting dependable performance in real-world designs.
• Optimized to nominal Zener Voltage: 6.4V, improving robustness in practical applications.
• Optimized to roHS: Non-Compliant, improving robustness in practical applications.
• Built to compact 2-Pin DO-213AA Surface Mount Package, making integration easier across a wide range of systems.
• Designed to dynamic Resistance: 200 Ohms, helping ensure consistent and reliable operation.

Microchip JANTXV1N4567AUR-1 Zener Diodes Applications

Automotive Electronics

• Well-suited for vehicle gateway module protection circuitry; Vz: 24V; Power: 2W; Package: SMB, helping designers meet typical integration requirements.
• Well-suited for regenerative braking control protection; Vz: 24V; Power: 3W; Package: SMB, helping designers meet typical integration requirements.
• Commonly applied in automotive lighting control module protection; Vz: 12V; Power: 1W; Package: DO-41, supporting stable and efficient system performance.
• Commonly applied in lED headlamp driver over-voltage protection; Vz: 15V; Power: 2W; Package: SMA, supporting stable and efficient system performance.
• Often used in crankshaft position sensor input protection; Vz: 6.2V; Power: 0.5W; Package: DO-41, where predictable behavior and reliability are important.

Consumer Electronics

• Commonly applied in smartwatch logic rail over-voltage protection; Vz: 3.3V; Power: 0.25W; Package: SOD-323, supporting stable and efficient system performance.
• Commonly applied in over-voltage protection for smartphone power rails; Vz: 5.1V; Power: 0.5W; Package: SOD-123, supporting stable and efficient system performance.
• Well-suited for game controller button interface clamping; Vz: 3.3V; Power: 0.25W; Package: SOD-323, helping designers meet typical integration requirements.
• Commonly applied in headphone amplifier input over-voltage protection; Vz: 5.1V; Power: 0.25W; Package: DO-35, supporting stable and efficient system performance.
• Often used in washing machine control signal clamping; Vz: 5.1V; Power: 0.5W; Package: SOD-123, where predictable behavior and reliability are important.

Power Management & Regulation

• Often used in dC supply protection in control cabinets; Vz: 18V; Power: 2W; Package: DO-41, where predictable behavior and reliability are important.
• Commonly applied in backup reference in redundant power systems; Vz: 5.1V; Power: 0.5W; Package: SOD-123, supporting stable and efficient system performance.
• Often used in over-voltage clamp in redundant supplies; Vz: 18V; Power: 2W; Package: SMB, where predictable behavior and reliability are important.
• Often used in power input protection in control modules; Vz: 12V; Power: 1W; Package: DO-41, where predictable behavior and reliability are important.
• Well-suited for bias voltage stabilization for analog stages; Vz: 9.1V; Power: 1W; Package: DO-41, helping designers meet typical integration requirements.

Industrial Automation & Control

• Often used in healthcare monitoring hub power protection; Vz: 12V; Power: 1W; Package: DO-41, where predictable behavior and reliability are important.
• Well-suited for industrial automation subsystem transient suppression; Vz: 30V; Power: 3W; Package: SMC, helping designers meet typical integration requirements.
• Commonly applied in medical imaging subsystem interface protection; Vz: 6.8V; Power: 0.5W; Package: DO-41, supporting stable and efficient system performance.
• Commonly applied in development kit power input protection; Vz: 12V; Power: 1W; Package: DO-41, supporting stable and efficient system performance.
• Commonly applied in ventilator control electronics protection; Vz: 5.1V; Power: 0.5W; Package: SOD-123, supporting stable and efficient system performance.

Signal Conditioning & Interface Protection

• Commonly applied in sensor simulator output clamping; Vz: 6.2V; Power: 0.5W; Package: DO-41, supporting stable and efficient system performance.
• Often used in measurement probe input protection; Vz: 12V; Power: 1W; Package: DO-41, where predictable behavior and reliability are important.
• Well-suited for rS-232 communication line protection; Vz: 12V; Power: 0.5W; Package: DO-35, helping designers meet typical integration requirements.
• Commonly applied in digital logic input transient suppression; Vz: 6.2V; Power: 0.5W; Package: SOD-123, supporting stable and efficient system performance.
• Commonly applied in industrial signal conditioning module over-voltage clamp; Vz: 12V; Power: 1W; Package: DO-41, supporting stable and efficient system performance.