Texas Instruments
Showing all 25 results
- One-Time Programmable (OTP): Fuse-link technology locks resistance permanently after final adjustment.
- Wide Resistance Range: 100kΩ end-to-end resistance with ±30% tolerance.
- I2C Interface: Simple 2-wire control with selectable address (AD0 pin) for multi-device configurations.
- Wide Voltage Range (3V–18V) – Supports high-voltage logic applications
- Low Input Current (100nA at 25°C) – Minimizes power consumption
- Balanced Symmetrical Outputs – Ensures uniform switching times (30ns typical)
- VSSOP-20 = best I/O density in a small outline — practical room for PWM, serial, and multi-channel ADC.
- High-speed 12-bit ADC suitable for fast sampling and control loops.
- Protocol-rich serial (UART/I²C/SPI) in a budget MCU for easy peripheral hookup.
- Middle-ground pin count in a slim SOT body—enough I/O for “real” designs without jumping to QFN.
- Family 24-MHz precision oscillator (crystal-less in many cases) for simpler BOM and height.
- Flexible internal VREF (1.4 V / 2.5 V) to match sensor ranges and improve ADC repeatability.
-
Leadless WQFN + exposed pad for solid grounding and heat spreading.
-
Family low-power + fast wake to balance responsiveness and battery life.
-
12-bit ADC to 1.5 Msps for rapid, repeatable sampling in small form factors.
- TSSOP-20 with ~17 GPIO for practical wiring and debugging.
- Nine 12-bit ADC channels (to 1.5 Msps) for multi-sensor builds.
- Same low-power DNA and software feel as MSPM0C110x for easy migration.
-
Tiny 8-pin SOT footprint with integrated 12-bit ADC.
-
Accurate 24 MHz internal oscillator; no crystal needed.
-
Multi-mode low-power design down to 200 nA shutdown.
-
WSON-8 for slim boards & thermal contact — exposed pad helps spread heat and stiffen the mount.
-
Fast 12-bit ADC with internal/external reference flexibility.
-
Crystal-less 24 MHz in many designs, minimizing BOM and height.
- 1 Mbps ISO 11898-2 Compliant Operation – Robust communication for industrial/automotive networks
- Tri-Mode RS Control – Toggle between high-speed, adjustable slope, and low-power standby (370 µA)
- Enhanced Protection Suite – ±16kV ESD, ±25V common-mode range, and thermal shutdown
- 8-Bit Serial-to-Parallel Conversion – Efficiently expands microcontroller GPIOs.
- Tri-State Outputs – Allows multiple devices on the same bus (high-impedance when disabled).
- Wide Voltage Range (2V–6V) – Works with 3.3V and 5V systems.
- ±0.5% Initial Voltage Accuracy (B-grade) – Superior precision for critical applications.
- Wide Adjustable Range (2.495V to 36V) – Flexible for diverse circuit requirements.
- 100mA Shunt Current Capacity – Strong handling for medium-power regulation.
- 92 PPM/°C Low Temp Drift – Ensures stability across industrial & automotive conditions.
-
Low cost, high utility – A dense mix of audio, video, Ethernet, USB, UART, and storage on one compact board dramatically reduces accessory sprawl during prototyping.
-
Software-ready out of the box – Processor SDK RTOS and CCS examples shorten bring-up; you get working I/O and reference projects on day one.
-
Open hardware collateral – Public schematics, PCB, and BOM accelerate custom board spin-ups and de-risk power, clocking, and layout choices.
- Military temperature range (-55°C to +125°C)
- Radiation-hardened design (100kRad TID)
- Enhanced ESD protection (2000V HBM / 1000V CDM)
- Ultra-Low Bias Current: ±4pA enables direct interface with piezoelectric and capacitive sensors.
- Wide Gain Range: Adjustable from 1V/V to 10,000V/V with ±0.001% nonlinearity error.
- Robust Protection: Withstands ±40V input overload without external components.
- Ultra-Low Distortion (<0.00003% THD+N)
- Blazing-Fast 1900V/µs Slew Rate
- Low Noise (2.7nV/√Hz) & Wide Bandwidth (132MHz)
- All-in-one USB — single cable for power, flashing, debug, and backchannel UART.
- Instant I/O — built-in red LED and user button for immediate bring-up and demos.
- BoosterPack-ready — standard 20-pin headers to snap in sensors, radios, and displays fast.
- FRAM Memory: 32KB nonvolatile storage with 10^15 write cycles and 100ns write speed.
- Ultra-Low-Power Modes: Measure down to µA with 32.768kHz crystal for LPM sleep states.
- BoosterPack™ Ready: 40-pin headers support 100+ plug-in modules (wireless, displays, etc.).
- Integrated Debugging: eZ-FET probe enables programming + EnergyTrace power profiling.
- Sensor Hub: Includes ambient light sensor + Grove connector (P1.1/P1.4) for Seeed Studio modules.
- Industrial Temperature Range (-40°C to +85°C) for harsh environment operation
- Higher Output Drive Capacity (±6mA at 5V) vs basic 74HC logic family
- Robust ESD Protection (2000V HBM) for improved field reliability
- Through-hole DIP package - Ideal for prototyping and repairs
- 15 LSTTL load drive capability - Strong output for direct loads
- Cascadable serial output - Expand to unlimited bits
- 60ns Access Time – Faster performance than 70ns variants for demanding applications.
- 256K x 16-Bit Architecture – Efficient 16-bit memory handling for older systems.
- Wider Temperature Range: Operates reliably from 0°C to 70°C.
- 70ns Access Time – Optimized for fast read/write operations in high-performance systems.
- 256K x 16-Bit Organization – Balances memory density with efficient data handling.
- 5V Single Supply Voltage – Compatible with legacy industrial and embedded devices.
-
DSBGA-8 footprint for the smallest prototypes and z-height budgets.
-
Full MSPM0C1104 feature set (24-MHz M0+, 12-bit ADC, UART/I²C/SPI) in a minuscule package.
-
Explicit X-device status to de-risk production—prototype now, change package later.