Filter
Showing 151–180 of 228 results
High-performance ebm-papst W4S200-HH04-01 AC axial fan delivers 450m³/h airflow at 1370 RPM. Features ball bearings, IP44 protection, and durable plastic housing for industrial applications.
- 450m³/h (265 CFM) Airflow for effective ventilation
- Ball Bearing Motor for long service life
- IP44 Protection against dust and water splashes
- Energy Efficient 30W operation
Massive 1070mm ebm-papst W3G910-GZ10-19F EC tubeaxial fan delivers 21,150 CFM at 1195 RPM. Features MODBUS RTU control, IP54 protection, and 3-phase EC motor with integrated PID controller.
Key Features: ✅ Massive Airflow Capacity - 21,150 CFM (592.2 m³/min) at 1195 RPM ✅ Advanced EC Technology - Electronically commutated motor with integrated PID controller ✅ Smart Industrial Control - RS485 MODBUS RTU, 0-10V/PWM, and 4-20mA control options
-
DSBGA-8 footprint for the smallest prototypes and z-height budgets.
-
Full MSPM0C1104 feature set (24-MHz M0+, 12-bit ADC, UART/I²C/SPI) in a minuscule package.
-
Explicit X-device status to de-risk production—prototype now, change package later.
- Tri-radio on one chip: Dual-band Wi-Fi 6 + BLE 5 + IEEE 802.15.4 for Thread/Zigbee in a single, compact MCU.
- Security built-in: Secure boot, XTS-AES memory encryption, HMAC, RSA/ECC/ECDSA, TRNG, APM & PMP hardening—ready for zero-trust IoT.
- Designed for battery life: LP RISC-V core, deep-sleep with LP SRAM retention, Wi-Fi TWT, and fine-grained PMU control.
- Tri-radio in one chip: Wi-Fi 6 + Bluetooth LE 5.3 + 802.15.4 (Zigbee/Thread) with built-in coexistence on a single antenna.
- Secure by design: Secure boot, XTS-AES flash encryption, digital signature, RSA/ECC, and HMAC in hardware.
- Ultra-low power: Deep-sleep around 7 µA with LP-SRAM retention and Target Wake Time to extend battery life.
- Low power without compromises – Deep-sleep around 7 µA with LP memory retention, fast wakeup, and flexible PMU states. ETM and GDMA enable peripheral-driven data paths so your CPU can nap.
- Security you can ship – Secure Boot, flash encryption, and a full hardware crypto suite (AES/SHA/RSA/ECC/ECDSA/HMAC), plus a power-glitch detector and true RNG, help protect firmware/IP and elevate trust.
- Radio versatility – Bluetooth LE 5.3 with 2 M and Coded PHY for either speed or range, plus 802.15.4 for Thread/Zigbee/Matter—covering the majority of modern IoT transports with one tiny chip.
-
Dual-core HP RISC-V up to 360 MHz + LP RISC-V up to 40 MHz for always-on tasks.
-
Rich vision & video engine: JPEG codec, ISP (1080p), PPA (scale/rotate/blend), H.264 encoder (1080p@30 fps).
-
Comprehensive security: Secure Boot, XTS-AES flash/PSRAM encryption, TRNG, RSA/ECDSA/HMAC/SHA accelerators, and access-permission management.
- USB device/host ready: Full-speed USB OTG with on-chip PHY streamlines accessories and field update paths.
- ULP always-on sensing: A dedicated ULP coprocessor handles RTC GPIO/ADC/touch while the main CPU sleeps.
- Hardened security chain: Secure boot + flash encryption + hardware AES/SHA/RSA and true RNG.
-
USB all the things: Native USB 2.0 Full-Speed OTG plus a built-in USB-Serial/JTAG device for programming, logging, and on-chip debug with minimal parts.
-
Vision & UI ready: Parallel LCD (8–16-bit RGB/I8080/6800) and DVP camera interfaces up to 40 MHz, with YUV/RGB conversions for low-cost displays and sensors.
-
Hardened by design: Secure Boot, Flash Encryption, AES-128/256, SHA-2, RSA up to 4096-bit, HMAC, Digital Signature, and TRNG for modern, production-grade security.
- 32 MB Octal flash + 16 MB Octal PSRAM for code, assets, and AI buffers.
- Dual-core LX7 up to 240 MHz with neural-network and signal-processing acceleration in ESP32-S3 silicon.
- 2.4 GHz Wi-Fi (to 150 Mbps) + BLE 5 with coexistence on a single PCB antenna.
- 500mΩ RDS(ON) @ 2.5V – Superior efficiency in low-voltage systems
- SOT-523-3 Package – Fits high-density PCB designs
- 600mA Drain Current – Handles robust loads in portable electronics
The Honeywell CSNP661 redefines reliability for 50A current measurement, combining closed-loop Hall-effect precision with industrial-grade ruggedness. Whether ensuring safety in motor drives, optimizing solar inverters, or protecting EV charging systems, its null-balance technology delivers lab-grade accuracy in harsh real-world conditions ?C all while eliminating the losses and thermal challenges of shunt resistors.
- UL 634 Level 1 Certified Maximum Security
- Integrated Tamper Resistance – No Weak Points
- True Passive Operation – No Power Required
- Ultra-low conduction loss: RDS(on) 5.9 mΩ typ., 7 mΩ max @ VGS = 10 V, ID = 82 A.
- High current & ruggedness: ID = 140 A (Tc = 25 °C), IDM = 550 A, repetitive avalanche allowed up to Tj(max).
- High-temperature operation: qualified for 175 °C junction temperature with low RθJC = 0.45 °C/W for efficient heat flow.
- Perfect Stability: Just ±0.3% capacitance variance across full temp range
- Micro-Scale: 0402 footprint (1mm length) ideal for wearables/IoT
- High Reliability: 500MΩ·μF minimum IR withstands harsh environments
- Ultra-Low ESR & ESL: Optimized for 100kHz+ SMPS designs
- High Capacitance Stability: Only ±15% variation (-55°C to +125°C)
- Robust Construction: "J" lead frame enhances vibration/shock resistance
- Compact & Stackable: 40% PCB space savings vs. conventional capacitors
- Proven heavy-duty construction — plastic housing with plated steel cap, nickel-plated brass toggle, and silver contacts for durability and low contact resistance.
- Drop-in panel fit — mounts through a 0.46875 in (11.9 mm) hole; supports up to ¼ in (6.35 mm) panels.
- Workhorse ratings — 10 A @ 36 V DC, ideal for common auxiliary loads in 12–36 V fleets.
- True heavy-duty build – silver contacts, plated-steel cap, and metal actuator for long service life in harsh cabins.
- Operator-safe control – momentary action in both directions springs back to center to help prevent unintended run-on.
- Fleet-friendly service – 3 screw terminals and a standard 15/32 in panel hole speed installation and replacement.
-
IP67-sealed construction with actuator O-ring and epoxy-sealed lead interface for harsh, wash-down environments.
-
High DC switching capability: 25 A @ 12 VDC or 15 A @ 24 VDC for direct control of many loads.
-
Drop-in panel fit: 15/32-in mounting, nickel-plated face nut, standard 11/16-in toggle, and 14 AWG leads for easy harnessing.
- Momentary in both directions: Up and Down return-to-center action for safe, operator-attended controls.
- Heavy-duty ratings: 25 A @ 12 V DC, 15 A @ 24 V DC, 10 A @ 36 V DC across the Standard Heavy Duty Toggle Switch series.
- Corrosion-resistant contacts: Silver contacts enhance life and reliability in harsh environments.
- Bidirectional Clamping: Guards against both positive and negative transients.
- Low Clamping Ratio: Vc/Vbr = 1.63 for superior energy absorption.
- Glass-Passivated Junction: Enhanced reliability vs epoxy-coated competitors.
- Anti-Fuse OTP Security – Permanent programming resistant to radiation & tampering
- 250 MHz High-Speed Logic – Supports DSP, motor control, and real-time processing
- Ultra-Low Static Power – Ideal for battery-backed & power-sensitive designs
The Microchip Technology VMK3-9005-32K7680000TR is a high-performance tuning fork crystal that provides accurate 32.768 kHz oscillation for wearable, IoT, and low-power embedded systems. With its ??20ppm stability, small SMD package, and RoHS compliance, it is an excellent choice for real-time clock circuits in consumer, medical, and industrial applications.
The Molex 19432-0001 MX150L Industrial Sealed Connector Housing is a high-performance, rugged solution for power-intensive industrial applications. With IP67 sealing, 30A current rating, and an easy crimp-and-plug design, it is an optimal choice for engineers requiring durable, waterproof connectivity in marine, construction, and industrial systems.
- VSSOP-20 = best I/O density in a small outline — practical room for PWM, serial, and multi-channel ADC.
- High-speed 12-bit ADC suitable for fast sampling and control loops.
- Protocol-rich serial (UART/I²C/SPI) in a budget MCU for easy peripheral hookup.
- Middle-ground pin count in a slim SOT body—enough I/O for “real” designs without jumping to QFN.
- Family 24-MHz precision oscillator (crystal-less in many cases) for simpler BOM and height.
- Flexible internal VREF (1.4 V / 2.5 V) to match sensor ranges and improve ADC repeatability.
-
Leadless WQFN + exposed pad for solid grounding and heat spreading.
-
Family low-power + fast wake to balance responsiveness and battery life.
-
12-bit ADC to 1.5 Msps for rapid, repeatable sampling in small form factors.
- TSSOP-20 with ~17 GPIO for practical wiring and debugging.
- Nine 12-bit ADC channels (to 1.5 Msps) for multi-sensor builds.
- Same low-power DNA and software feel as MSPM0C110x for easy migration.
The Omron GLS-1 is a robust and highly reliable magnetic proximity sensor designed for long-term automation, security, and equipment monitoring solutions. With its 15mm sensing range, NO reed switch, and screw-mount design, it delivers precise, maintenance-free operation in diverse applications.
2N7002T from Onsemi delivers robust performance in compact form factor, combining industry-standard specifications with enhanced reliability. Designed for general-purpose switching applications, this MOSFET offers:
- AEC?Q101 qualified - Meets automotive-grade component reliability standards
- PPAP capable - Supports Production Part Approval Process documentation
- RoHS compliant construction - Eliminates hazardous substances (Pb, Hg, Cd, etc.)
- Halogen/BFR free - Environmentally friendly material composition